DK8 with Bottom Heated Platen
Geo Knight

DK8 with Bottom Heated Platen

SKU:
DK8-DKA68BHT
MPN:
DK8-DKA68BHT
Weight:
85.00 LBS
Shipping:
Calculated at Checkout
  • Bottom heated platen for the DK-8
  • DK-8 heat press
$1,290.00

Description

DK8 plus bottom heated platen

Digital Knight 6x8 Label Press

The DK8 label press is a 6x8 small platen heat press. This machine is very popular for label printing and small transfer & applique sealing.

If your image area is less than 8 inches, and you need to specifically isolate an area of a garment or bag, the tall pedestal on the DK8 allows for precise location of just the area needed to be pressed. Pockets, collars, socks, sleeves and similar areas are easy to press without flattening parts of the garment that should not be pressed. This saves the user from pressing very large areas of bulky items unnecessarily, as would happen on a standard T-Shirt press. The included interchangeable tables allow for isolation of the pressing area down to a mere 3x3 inches.

6 x 8 Bottom Heat Fixture

Compatible with DC16, DC16AP, DK8, DK8T

Features

  • A bottom heated 6" x 8" platen pedestal is available for the DK8 and DK8T. The separately controlled heat pedestal slides right into the position the standard table is located. This is ideal for thick embriodered appliques, certain lettering transfers, and other heat transfer and fusing applications requiring top and/or bottom heat.

Features

  • Fully digital temperature control 32°-600°F range
  • Automatic digital timer & dual pre-press timer
  • 70 Programmable presets
  • Hardened high-strength pivot points
  • Solid Steel framework
  • SuperCoil-Microwinding™ heater technology
  • 6x8, 3x5, 3x3 Interchangeable tables included
  • Self lifting gas-spring, & wide opening
  • Temperature readout accuracy +-2°F - can show °C or °F
  • User selectable end-of-cycle alarms
  • Records number of pressing cycles done
  • Teflon-coated 3/4" thick heat platen

Warranty

  • FREE LIFETIME Tech Support!
  • Lifetime warranty on heat platen
  • 5-year warranty on frame
  • 3-year warranty on controller
  • 1 year warranty on parts

Specs

  • Weight: 65 Lbs
  • Electrical: 600W / 5A / 110V
  • Dimensions: 19"L x 12"W x 18"H
  • (add $35 for 220V international)

 

THIS PRODUCT IS NOT ELIGIBLE FOR FREE SHIPPING, THERE IS A $79.00 MINIMUM SHIPPING FEE. CONTINENTAL U.S. SHIPPING ONLY.

Warranty:
·        FREE LIFETIME Tech Support!
·        Lifetime warranty on heat platen
·        5-year warranty on frame
·        3-year warranty on controller
·        1 year warranty on parts
View AllClose

Warranty Information

Geo Knight & Co warrants that the press is free from defects in both material and workmanship One Year from the date of invoice to the buyer. If any parts or workmanship are found to be defective in manufacture, Geo Knight & Co will repair or replace the defective parts or workmanship. In addition, Geo Knight & Co warrants that the Digital Knight heat control is free from defects in both material & workmanship and is covered under no-charge support for (3) years. Geo Knight & Co also warrants that the heating element is warranted for the lifetime of the press, provided it is owned by the original purchaser. This lifetime warranty on the heating element does not cover temperature sensor failure, damage or disconnection. This warranty covers all parts to repair the defects, except when damage results from accident, alteration, misuse or abuse, or when the machine has been improperly installed, or modified in any way. If the press becomes defective during the limited warranty period of one year for the entire press, three years for the control, or the lifetime of the heating element, Geo Knight & Co reserves the right to recall the defective press to the factory for repairs if on site component replacement is deemed not possible by Geo Knight & Co. A return authorization must be granted by Geo Knight & Co prior to its return. If a press covered by the one year limited warranty must be returned to the factory for repairs, Geo Knight & Co shall make every effort to repair buyer's press. However, Geo Knight & Co reserves the exclusive right to determine whether to repair or replace a defective press. If Geo Knight & Co authorizes a replacement press, the warranty of the replacement press shall expire on the anniversary date of the original machine's invoice to the buyer. There are no warranties which extend beyond the description on the face hereof. Seller disclaims any implied warranty of merchantability and/or any implied warranty of fitness for a particular purpose, and buyer agrees that the goods are sold as is???. Geo Knight & Co does not warrant that the functions of the press will meet the buyers requirements or expectations. The entire risk as to use, quality and performance of the press lies with the buyer. In no event will Geo Knight & Co be liable for any damages, including loss of profits, destruction of goods or any other special, incidental, consequential or indirect damages arising from the use of the press or accompanying materials. This limitation will apply even if Geo Knight & Co or its authorized agent has been advised of the possibility of such damage.
View AllClose